 |
 |
 |
 |
Model: | MAHCL4X4V2
| Product Type: | True 4x4 HDBaseT matrix
| HDMI Compliance: | HDMI Deep Color & full 3D
| HDCP Compliance: | Yes
| Video Bandwidth: | Single-link 225MHz (6.75Gbps)
| Video Support: | 4K2K@60Hz@8bits/1080p@60Hz 12bit, 3D
| Audio Support: | Surround sound (up to 7.1ch) or stereo digital audio
| ESD Protection: | (1) Human body model - ±19kV (air-gap discharge) & ±12kV (contact discharge) (2) Core chipset ±8kV
| HDBaseT Max. Distance: | 328ft (100m)
| Video Input: | 4x HDMI
| Video Output: | 4x HDMI / 4x RJ45 HDBaseT
| HDMI Input Selection: | Push-in button / IR remote control / RS-232 control/IP
| IR Remote Control: | Carrier frequency: 30-60kHz / Angle ±45° | HDMI Connector: | Type A (19-pin female)
| IR Input Connector: | (3.5mm) Receives IR commands from remote control
| IR Output Connector:
| (3.5mm) Sends IR commands to source components | RS-232 In/Out Connector/IP:
| DE-9 (9-pin D-sub female) x 5 / RJ45 x 1
| MECHANICAL
|
| Enclosure:
| Metal case
| Mounting: | 1U rack-mounting ears and wall hanging holes | Power Supply:
| 12VDC 4.16A | Power Consumption:
| 2.6A (Max) | Temperature: | Operation: 32 to 104°F, Storage: -4 to 140°F, Humidity: up to 95%
| Dimensions - inches: | 17.25"(w) x 1.73"(h) x 7.76"(d)
| Weight - lbs: | 5.29
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
- HDBaseT HDMI 4 by 4 matrix switcher
- Dual output: local HDMI or RJ45/HDBaseT (Note: ether HDMI out or HDBaseT out per zone. Not both at same time)
- Optional HDBaseT receivers extend HDMI, IR, RS-232 over CAT5/6 cable up to 328ft (100m)
- Uncompressed high resolution video up to 4Kx2K
- Deep color (36bit) and 3D HDMI and HDCP compliant
- Supports LPCM, Dolby AC3, TrueHD, DTS-HD
- EDID management, default, learn and auto EDID from displays
- Local control using the front panel buttons, IR remote control, RS-232 and IP
- Front panel LCD display and status LEDs
- Fast response time, 2 to 5 seconds per channel switch
- Easy installation, includes ears for rack-mounting and wall-mounting
|
|
 |
 |
 |
 |

|