Home > Products > IP Cameras >

PoE IP Camera Extender over Coax or Two-Wire Up To 3280'
PoE IP Camera Extender over Coax or Two-Wire Up To 3280'
 
 



MSRP (Members Only)

Stock Status:In Stock

Model: IP3P
Qty:

Description
Resources
 
PoE IP Camera Extender over Coax or Two-Wire Up To 3280'

Model: IP3P PoE Extender is designed to send and extend Ethernet network with PoE and can be established using existing cables up to 1,968 feet (600M). You can use Coax cable or any two-wire cables (UTP cable, telephone line, antenna cable, or bell wire) that is no longer in use to connect a 10/100Mbps PoE device, IP telephone, PC…etc. without having to lay any new cables. Extended pass through PoE to allow a single PoE source, such as a PoE network switch (IEEE 802.3af/at) to provide power to both TX/RX and the IP/PoE camera. It is a perfect solution for extending data and power transmission for warehouses, parking lots, campuses, casinos etc. with existing cable long ranges.

  • Extend PoE signal up to 1,968 feet (600M), Ethernet or any TCP/IP devices up to 3,280 feet (1000M)
  • Support 10/100 Mbps transmission rate
  • Provides pass-through PoE up to IEEE802.3 at 30W
  • Provides DC12V 1Amp power to camera
  • Supports high power PoE to PTZ cameras at long distances