4K 60Hz 4:4:4 AV Over IP System Decoder

The ZT-332/333 series of encoders and decoders provides a flexible, scalable AV-over-IP solution for switching and distributing 4K UHD media over standard Gigabit Ethernet networks. It supports resolutions up to 3840 × 2160 at 60Hz with 4:4:4 color, HDR10, Dolby Vision, and HDCP 2.2/2.3. Audio, video, USB, IR, RS-232, and power signals can be routed independently or together over a single Cat 5e or higher cable at distances up to approximately 330 ft. (100 m). The system also supports low-latency video wall configurations up to 16 × 16 displays, making it suitable for homes, classrooms, conference rooms, broadcast facilities, and other professional signal-routing applications.

The ZT-332 supports PCM 7.1, Dolby Atmos, DTS-HD Master Audio, and DTS through its built-in native audio-over-IP functionality, with optional Dante or license-free AES67 integration available. Additional features include CEC one-touch play and standby control, bidirectional IR and serial communication, independent analog audio input and output, and USB extension for keyboard and mouse control. The system can be managed through the Z-Net Configuration Tool for Windows, Z-Net for iPad, or the ZT-162 IP controller

Please note that these units can be connected via 1G Optical port or 1G BASE-T (Gigabit Ethernet) port. When using with 1G Optical port, power supply is needed for both encoder and decoder.

Please note: The ZT-332/333 encoder and decoder will work as point to point extenders with KVM without the need for a switch or the IP Controller. The units will have to be powered on both ends.

• Supports video resolutions up to 4K@60Hz 4:4:4, including HDR10 and Dolby Vision when HDMI Timing Hybrid is set to the default “Pass-through” mode.
•  
• Supports CEC one-touch play, standby commands and CEC Frame control, along with video wall configurations up to 16 × 16 displays.
• Supports multi-channel audio formats including PCM 7.1, Dolby Atmos, DTS-HD Master Audio and DTS through the IP400 system’s built-in native audio-over-IP.
• Transmits AV, USB, IR, RS-232, audio and power signals up to 328 ft./100 m over a single Cat 5e cable or higher. Units support 1G Base-T and 1G optical connections; external power is required for both the encoder and decoder when using optical connections. A manual reboot is required after enabling or disabling Dante, AES67 or audio bridge functions.
• Optional Dante or AES67 audio-over-IP add-ons are available, with one add-on operating per device at a time. AES67 requires no license, while Dante requires license activation for permanent use and otherwise operates in a one-hour trial mode after each reboot.
•